top of page

SURFACE MARKERS

 

A-TAG PAVEMENT MARKERS
DAS CURB MARKERS

A-TAG markers are embedded into concrete or asphalt. These brightly colored UV-stable polypropylene markers are slightly recessed, so even snowplows will not destroy them.

 

1.5" diameter with molded legend.

 

Use of the Rhino A-TAG helps:

  • Speed up the locating process

  • Prevent damage to buried pipes and cables

  • Identify street and sidewalks patches permanently (and the company doing the work)

  • Identify buried valves, splices and more

Rhino das Curb Markers can also be used after underground locates are performed. After each locate, have the locator glue down a das Curb Marker. This leaves clean looking, professional, warning message.

Rhino das Curb Markers are perfect for areas where homeowners are concerned about the appearance of above-ground markers.

700 SERIES SOIL MARKERS

SoilMarkers quickly locate underground utilities and buried drops, stub ends, valves, handholes, manholes and test stations.

 

The Series 700 SoilMarker is a two-piece marker 7" in diameter with a 13" stake.
The standard Series 700 is a hot-stamped product; markers with Rhino Fusion Graphics are available upon request.

HIDEOUT TEST STATION

The Rhino HideOut™ is a 24” flush mounted test station.  The Hideout's design allows for easy access to wires when attached to the sliding terminal board. 

 

The HideOut is locatable, comes standard with an integrated steel plate beneath the cap, or a 3M™ Electronic Marker System (EMS) marker. 

 

The HideOut has a locking cap that also offers a highly visible, low profile warning message and comes punched with the TriGrip™ Anchor System, allowing it to lock into the ground in varying soil conditions.

MARKING PAINT

These fast-drying products penetrate and adhere to hot surfaces, and deliver a line you can count on for all your surveying and marking needs.

 

Available in Chalk, Water or Solvent based.

WHISKER FLAGS

Whisker locating flags are composed of a metal bracket with a 6" or 9" plastic filament.

 

These locating flags slip quickly and snugly on a 60d nail and can be driven into soil or other bases.

Rhino whisker flags can be mowed over with minimal damage to the flag. These locator flags spring back, even after being hit with a grader.
 

ORBITAL FORGED CONCRETE MARKERS

These utility markers are manufactured of orbital forged aluminum, or bronze, to ensure that they will not crack, chip, or break.

Both styles can be installed by tapping them into wet concrete or epoxy.

 

The RC1 model is 2” in diameter. The RC02 model is 3 1/2”in diameter.

400 SERIES SOIL MARKERS

The Rhino 400 Series SoilMarker is a one-piece marker with a 4” round top and 8” stake.


It has a choice of stake styles with or without anchor barbs.

 

The warning message is molded into the SoilMarker top and is completely customizable.

PAVEMENT DECALS

Rhino Pavement Decals are long-term temporary markers that are designed for use on concrete and asphalt and have a skid resistant surface.

 

These brightly colored pavement decals can be used to mark utilities, pipelines, storm drains and roads.

 

Rhino pavement decals install easily in seconds with no adhesive required. They can be applied directly to asphalt or concrete streets, sidewalks or pathways. Just brush, peel, and stick. The pavement decals easily conform to hard surfaces.

PRINTED PIN FLAGS

These custom-printed locating flags are 4 mil. marking flags available in virtually any height and size.

Rhino locator flags are available with wire, plastic, or fiberglass staffs.

A carrier probe is available for placing flags in hard, rocky or frozen soil.

ASPHALT MAG-NAIL

Used to mark asphalt surfaces, the MagNail is driven directly into the asphalt and is easily detectable with a magnetic locator.

The 1-1/2” stainless steel washer can be stamped with a message of up to 28 characters including spaces.
 

COPPER PAVEMENT MARKER

This copper-blend pavement marker has a 1.17" diameter which can be customized with up to 14 letters or numbers.

Installation is completed quickly with our custom drill bit and expansion plug. The machine-knurled stem grips to and deforms the ribbed expansion plug.

 

The copper pavement marker should be countersunk, protecting it from snow plows and shovels.

bottom of page